Follow

SMART Board SB600, 800 Series and 8070/8055, LED status indicator lights

Smart Board Status Lights

OFF - No Power
USB power 600 series, AC power 800 series and SBM600 series

SOLID RED - Receiving power but not communicating with computer.
Check and re-connect cable connections

FLASHING AMBER - Either firmware is being updated or controller is locked/failed.
Do firmware flash steps here - SMART Firmware update/Flash
If issue persists replace controller with a known working one from a different SMART board.
SB600 Controller Replacement
SBX800 Controller Replacement

FLASHING GREEN - Unable to connect to Smart Drivers on computer
Reinstall SMART drivers

SOLID GREEN - Good To Go

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments